A pressure washer hose is a tube reinforced with wire mesh as well as two or more high-density plastic layers. Pressure washer pumps make use of the pressure washer hose since an ordinary hose can not survive the high-pressure water flowing through the pipe. It is critical to buy a pressure hose that will withstand the pressure from a pressure washer pump.
Therefore, the user should choose a pressure hose carefully considering the following factors: length, diameter, connection type, in addition to the type of material. It is best to buy a pressure washer hose with a higher pressure rating than the pressure washer pump to avoid failure or bursting.
Also, check out: Best Gas Pressure Washers in 2021 | Powerful Cleaning!
Top 10 Best Pressure Washer Hose in 2021
10. Yamatic ProWash NonMarking
This pressure washer hose works well in commercial pressure cleaning. It is 30% lighter than a rubber hose, which makes it easier to clean.
The Yamatic ProWash Nonmarking 5/16inches pressure washer hose has a burst pressure of 13600PSI. The recommended working pressure is 3400PSI to 4200PSI. A 3/8 inches quick premium connector provides a reliable connection. It has a diameter of 5/16inches with a 40ft length.
- The hose is lighter than rubber by 30%.
- Its recommended working pressure is 3400PSI to 4200PSI.
- It has a diameter of 5/16inches and a length of 40ft.
9. Hefty Hoses 50ft 3000PSI Pressure Washer Hose
The Heft Hoses Pressure washer hose is lightweight, lays flat as well as leak-free. It comes with a high psi of 6000 and a quick connector kit as well as a hose to hose coupler.
Strengthened polyethylene, reinforced with poly-fiber, makes up the materials that design the Hefty hose. Its outer layer manufacture material is industrial strength, schedule 80 PVC that can hold pressure up to 6000PSI. The pressure washer connection is 14mm. It is 50ft long accompanied by M22/ 14mm fittings.
- It can withstand pressure up to 6000PSI.
- Compatible with all major high-pressure washer brands such as Karcher, Ryobi, Craftsman, Honda, Black & Decker, and Briggs & Stratton.
- It uses a 14mm connection.
8. 4000PSI Black High-Pressure Washer Hose
The pressure washer hose works well in commercial cleaning applications because of its 4000PSI capacity. Its whole exterior is rubber.
The inner tube has synthetic rubber reinforcement with a layer of braided high tensile steel. It has a working pressure of 4000Psi and a bursting pressure of 16000PSI. The hose connection constitutes of 3/8 inch quick female brass socket and 3/8 inch Steel Plug.
- It can withstand pressure up to 16000PSI.
- The pressure washer hose is heavy-duty.
- It is durable and resistant to kinking.
7. Propulse A Schieffer
The pressure washer hose works well for commercial cleaning applications. Its components are of high-quality.
The whole pressure washer hose has a rubber construction with reinforced high tensile braided steel. It has a working pressure of 4000PSI. The hose has a wrapped finish of embossed lay line cover.
- The hose is heavy-duty.
- It has a large diameter to increase more pressure.
- The working pressure is 4000PSI.
6. Simpson Cleaning Monster
This pressure washer hose has high-pressure capacity with incredible features. The design of this pressure washer hose makes it suitable for cold-water pressure washing.
The Simpson Cleaning Monster hose inner lining is dual-braided for toughness. It features a steel-over polyester material that makes it resistant to UV rays as well as harsh weather. The design makes it easy to connect to a pressure washer. It comes with a 3/8inches male quick connect plug and a 3/8inches female quick connect socket.
- The Simpson Monster hose is heavy-duty.
- It is extremely resistant to UV rays.
- The design suits most gas pressure washers.
5. Yamatic Anti-Kink Pressure Washer Hose
The Yamatic Anti-kink pressure washer hose is suitable for electric and gas-powered pressure washers. It is super wear-resistant, thus a long lifespan.
This hose uses a newly developed material Anti-kink. It enables the tube to move extra washing distances and easy roll-up management. Yamatic Anti-Kink makes use of non-marking technology to prevent slipping and friction. The hose has durable brass connectors to connect with the pressure washer firmly.
- It is work on most pressure washers.
- The hose is heavy-duty and can withstand high pressure.
- The anti-kink material makes it easy for storage.
4. Propulse A Schieffer CO
The Propulse UberFlex Pressure hose is the most flexible hose in the market. The technology used delivers a revolutionary upgrade to the user.
It has a working pressure of 3100PSI. The UBERFLEX hose has distinctive properties that enable superior resistance to kinking as well as abrasions. The connectors on the hose are compatible with most pressure washer brands.
- The pressure washer hose is lightweight, durable, as well as sturdy.
- It is very flexible.
- The Anti-kink material ensures resistance to kinking.
3. PEGGAS High-Pressure Washer Hose
The usage of this hose cuts across all types of cleaning jobs, i.e., heavy-duty jobs as well as light jobs. It is a high-quality pressure washer hose that suits the needs of a user.
The PEGGAS pressure washer hose has a working pressure of 3200PSI. It comes with universal M22 connectors that are in almost every pressure washer pump. The hose is compatible with most of the pressure washer brands in the market.
- The hose is compatible with most brands in the market.
- Its material is durable and long-lasting.
- The working pressure is 3200PSI.
2. Twinkle Star Pressure Washer Hose
The Twinkle Star Pressure Washer Hose is a high-quality capacity pressure hose that can work in all cleaning areas. It comes with an extension of 50ft long, thus making it easy to maneuver.
The product has a working pressure of 3000PSI at a maximum temperature of 140o F/ 60oC. It comes with a universal connector fitting of M22 Metric female fitting. It is compatible with most pressure washers.
- The hose is compatible with most washers.
- It has excellent maneuverability.
- The fittings are solid brass, thus no leaks.
1. Yamatic Kink Resistant High-Pressure Hose
The Yamatic Kink Resistant Pressure Hoses is suitable for gas-powered pressure washers. It is ideal for use in cleaning windows, floors, driveways, windows and many more places.
It has a working pressure of 3200PSI and a bursting pressure of 8700PSI. The material used to design the hose is wear-resistant and durable. It makes use of non-marking and Anti-kink materials, thus making it easy to roll up, carry, or even drag.
- The hose is durable.
- Its working pressure is 3200PSI.
- Due to non-marking and Anti-Kink materials, it is easy to drag, roll up as well as carry.
A pressure washer hose is essential for owners of pressure washers. One might wonder why the features of a pressure washer hose concentrate so much on the pressure capacity, but it because the wrong pressure washer hose will burst if it cannot hold the pressure required.
The most vital part of a pressure washer hose is the durability, and as a customer, make the best choice for the service you require. The price when it comes to purchasing a pressure washer hose should be the last consideration while working pressure and durability should the most essential factors.